The Importance of Mold Maintenance: Ensuring Longevity and Efficiency

Did you know? Mold maintenance is even more critical than mold repair. Frequent repairs can shorten a mold's lifespan, while proper maintenance can significantly extend it. By prioritizing maintenance, you can ensure the mold operates smoothly, reduce unnecessary wear on moving parts, and minimize oil contamination during production.

Why Mold Maintenance is Essential

Mold maintenance is necessary to:

• Ensure the mold operates normally and achieves its intended service life.

• Reduce wear and tear on moving components.

• Minimize oil pollution and other production issues.

Categories of Mold Maintenance

Mold maintenance can be divided into three main types:

1. Daily Maintenance:

• Lubricate moving parts such as ejector pins, sliders, guide columns, and guide sleeves.

• Clean the mold surface and maintain water channels.

2. Regular Maintenance:

• Clean exhaust grooves and remove trapped black spots or debris.

• Inspect and repair damaged or worn areas.

3. Appearance Maintenance:

• Protect the mold's exterior from rust.

• Apply anti-rust oil to the cavity before storage.

• Store the mold in a closed environment to prevent dust from entering the core.

Key Maintenance Precautions

1. Lubricate Moving Parts Daily: Ensure all moving components are properly oiled to prevent friction and wear.

2. Keep the Mold Surface Clean: Avoid sticking labels on the parting line (P/L) surface, and ensure no residue remains before continuing production.

3. Address Abnormalities Immediately: If issues such as ejection problems or unusual noises during mold operation arise, repair them promptly to prevent further damage.

Safety First

Above all, safety must always be the top priority. Mold repair and maintenance involve handling heavy equipment and materials, so proper safety protocols must be followed at all times.